Connecting to a Capture Engine from Omnipeek
In order to view packets and data from a Capture Engine, you must first connect to the Capture Engine from the Capture Engines window.
To connect to a Capture Engine from Omnipeek:
1. Do one of the following to display the Capture Engines window:
• Choose > .
• Click on the Start Page.
The Capture Engines window appears and displays the list of currently defined Capture Engines.
NOTE: Both Omnipeek and Capture Engine Manager maintain the same list of Capture Engines. Making a change in either program automatically updates the list in the other program.
![](/static/650786ed1cb789496dbc5be3ac18083f/4993b/LiveCapture_LiveWire_Capture_Engine.4.17.1.jpg)
2. Click . The Insert Engine dialog appears.
NOTE: You can also click in the toolbar to find all of the Capture Engines available on your network segment. See Discover Capture Engines for details.
![](/static/327cec2b044d3c81d25fdde6f1d42ee9/1b1f8/LiveCapture_LiveWire_Capture_Engine.4.17.2.jpg)
3. Complete the dialog:
• Host: Enter the IP address of the Capture Engine that you want to connect to.
• Port: Enter the TCP/IP Port used for communications. The default port is 6367.
• Domain: Type the Domain for the Capture Engine. If the Capture Engine is not a member of any Domain, leave this field blank.
• Username: Type the Username for login to the Capture Engine.
• Password: Type the Password for login to the Capture Engine.
4. Click . When the connection is established, the Capture Engine appears in the Capture Engines window.
![](/static/8e80f4c3d49f4c81d951632e971448f3/031dd/LiveCapture_LiveWire_Capture_Engine.4.17.3.jpg)
TIP: You can add multiple Capture Engines to the Capture Engines window by clicking .
5. Click to add a group of Capture Engines to the Capture Engines window.
6. Select the Capture Engine group and then click to add an Capture Engine to the group.
![](/static/4be88ec0be6c10955b8a7997b18c0fb2/4993b/LiveCapture_LiveWire_Capture_Engine.4.17.4.jpg)